Inspection template in the LeanSuite app
Last reviewed
Noise level survey checklist
Check of noise readings against action levels.
The full question list
The 7 questions in the inspection
Every question is answered Yes, No or N/A. Each No is flagged and asks for a photo and a comment, so the finding arrives with its evidence.
Survey
- 1Meter was calibrated before use
- 2Readings taken at operator positions
- 3Readings recorded with time and conditions
- 4Areas above the action level are signed
Follow-up
- 5Controls were reviewed for high-noise areas
- 6Results were shared with staff
- 7Survey is signed
When to use it
- When it is due on your audit programme, or after a change or a problem.
- The person responsible for the area or equipment answers each question on the spot.
- Each record starts with: Area, Meter ID.
How it is scored
The template is built with points per answer and a pass mark of 90. In this library every audit is set to pass at 80 and every inspection at 90. Each submitted inspection shows its score and pass or fail, and every No is flagged with its photo and comment.
Change the points or the pass mark after you clone it. How rules and scoring work.
Read and print
More in safety inspections and audits
- Lighting level checklist9 questions
- AED inspection checklist9 questions
- Emergency lighting inspection checklist8 questions
- Eyewash and safety shower weekly checklist12 questions
- Water heater inspection checklist: hot water safety6 questions
- Compressed gas cylinder storage checklist11 questions
Use this template in LeanSuite
It is ready in the Template Marketplace inside Lean Creator as “Noise Level Survey Check”. Clone it into your plant, change any question, then schedule it to a person, role or asset with reminders. Auditors complete it on a phone or tablet, with photo evidence where required.
Not on LeanSuite yet? On a 90-day pilot our team sets up your account and digitizes the forms and checklists you use today, this one included.