Skip to content
LeanSuite

A new story from the plant floor every day

The LeanSuite Crew

Ten people from one plant take on one real shop floor problem a day. Each story ends with something you can do tomorrow morning, and the free template or guide that goes with it.

The cast

Meet the crew

Ten fixed characters, one for each seat at a plant's table. What follows is how they appear in the series: their own words from the episodes, what they bring to a problem and how they react. Each one has the free LeanSuite templates, tools and guides that fit their job.

Marcus, the operator: a smiling man in a yellow hard hat and orange safety vest, holding a small machine part.

Marcus

OperatorVoice: quick, upbeat

“Hi! I'm Marcus. I run line three. If it jams, I know first.”
Cares about
The jams and odd sounds on line three. He stands next to the machine all shift, so he hears them before anyone else.
Usually brings
A jam that is closed on the board but still jamming on the machine, a press that sounded rough for days, and a pallet that nearly hit him.
How they react
Shrugs off a near miss at first and says why: the last person who reported one got blamed, and the form took forever. Once tagging is quick and someone thanks him out loud, he tags it.
Rosa, the shift supervisor: a woman in a white hard hat and a lime safety vest over a grey shirt, holding a clipboard.

Rosa

SupervisorVoice: firm, steady

“And I'm Rosa, the shift supervisor. I keep the whole shift moving.”
Cares about
A shift that keeps moving, and an action board that tells her the truth about the floor.
Usually brings
A board that shows green while the line is red, and a bad week of a near miss, a press down and a line waiting that nobody warned her about.
How they react
Pushes back first (“We closed that one. I signed it myself.”), then asks the practical question and gives the answer an owner: Marcus on the check, a tag on every rough noise.
Gurpreet, the CI lead: a bearded man in a lavender turban and a blue polo shirt, holding a pad of sticky notes.

Gurpreet

CI leadVoice: clear, calm

“Gurpreet here, continuous improvement. I connect the dots.”
Cares about
Getting what the floor knows in front of the people who decide, in a form they can act on: a number, a check, a huddle.
Usually brings
Waste that finance cannot use yet, and a report that counts closed actions instead of fixes that held.
How they react
Calm and explanatory. He first says “It's waste! It's obvious!”, then restates it in labor hours that produce zero output and offers to count the real hours on the floor before the next conversation.
Grace, the plant leader: a woman with curly hair in a navy blazer and trousers, holding a tablet.

Grace

Senior leadershipVoice: deep, measured

“And I'm Grace. I lead the plant. And yes, I'm still learning too.”
Cares about
Whether the numbers on her report mean the plant is actually better, and who is accountable when something goes wrong.
Usually brings
A report that says every action this quarter was closed while the plant is still firefighting, and a defect that got out.
How they react
Asks for a name first (“I want a name.”), then changes her mind when the question is turned around, and picks the number she will ask about from now on: how many fixes held, not how many were closed.
Dana, the maintenance technician: a woman in a navy cap and coveralls with a tool belt, holding a large wrench.

Dana

MaintenanceVoice: gruff, practical

“Dana, maintenance. If it's broken, I fix it. If it keeps breaking, I want to know why.”
Cares about
Why things keep breaking, not only getting them running again.
Usually brings
The same guide swapped twice, and a bearing that failed after a rough noise nobody passed on to her.
How they react
Gruff and practical. She wants to know what is chewing the part up, and says what would have made it a quick fix: a tag on Monday instead of a breakdown on Thursday.
Anam, the quality engineer: a woman in a teal hijab and a white lab coat, holding a magnifying glass.

Anam

Quality engineerVoice: precise

“I'm Anam, quality. I ask why one more time than everybody else.”
Cares about
Finding the cause that can be changed for good, instead of blaming a part or a person.
Usually brings
A worn guide that is only where the problem shows up (the bracket shifts after every changeover), and two look-alike parts sitting in the same bin.
How they react
Precise and short. She turns blame into a question (“Why was the mistake so easy to make?”) and answers it with a fix that makes the mistake impossible for the next person too.
Tom, the finance manager: a man with glasses in a grey suit and blue tie, holding a calculator.

Tom

FinanceVoice: crisp

“Tom, finance. Show me the dollars, and I'm listening.”
Cares about
Costs he can put on a page: hours, dollars, a number he can check.
Usually brings
The question every improvement idea meets sooner or later: what does it cost me?
How they react
Blunt. “Waiting isn't a number” and “Not to my spreadsheet, it isn't.” Once the problem is stated in labor hours that produce zero output, he asks for hours per week.
Priya, the new hire: a young woman with a long braid in a green hard hat and an orange safety vest, holding a blue binder.

Priya

New hireVoice: young, friendly

“And I'm Priya! It's my first week. I have a lot of questions.”
Cares about
Learning the real jobs, and not getting in the way while she does.
Usually brings
What a new person sees: only one person knows the changeover on line two, and nobody has shown her yet.
How they react
Asks the obvious question out loud (“So my training starts with the jobs only one person knows?”) and then sees herself differently: “I'm not just the new one. I'm the backup plan.”
Diego, the safety lead: a man with a moustache in a blue hard hat and a green safety vest, holding an orange traffic cone.

Diego

Safety (EHS)Voice: bright, alert

“Diego, safety. I'm always on the lookout.”
Cares about
Warnings that go unreported: near misses, blind spots, and people who stay quiet because speaking up costs them.
Usually brings
A near miss nobody wrote down, and the habit behind it: reporting feels like confessing.
How they react
Stops people mid-shrug (“Marcus, wait. Are you going to report that?”). His rule is that reporting has to be quick, nobody gets blamed, and something has to change. He thanks the reporter out loud at huddle.
Kenji, the HR manager: a smiling man in a teal cardigan and a white shirt, holding a mug of coffee.

Kenji

People & HRVoice: warm

“I'm Kenji, people and HR. Hiring, training, and keeping good people.”
Cares about
Who can really do each critical job, and what happens to the line when that person is out or leaves.
Usually brings
A job only one person can do, and a new hire who has only watched it.
How they react
Calm follow-up questions (“And if that person ever leaves for good?”), then a plan: map every critical job and who can really do it, not who once watched it.

The crew is fictional: animated characters with computer-generated voices. The off-screen narrator (warm, unhurried) joins in wherever a principle lands. The problems they work on are ordinary plant floor problems.

How it works

How an episode works

One problem, told once as a full story and three more times as the short lessons inside it. A new one goes up every day.

  1. Step 1

    One real problem a day

    Each day the crew takes on a problem plants actually have: a jam that keeps coming back, a near miss nobody wrote down, a job only one person can do.

  2. Step 2

    One full episode

    A problem bites in the first line, the crew chases it through the plant, the narrator steps in where a principle lands, and the characters solve it. The ones listed below run from 1:45 to 7:28.

  3. Step 3

    Three Shorts

    The episode's three lessons, each told on its own with the characters it belongs to. Each Short points back to the full episode.

  4. Step 4

    One thing for tomorrow

    The narrator ends on what to do tomorrow morning, and the episode's free guide and templates are linked in its description.

How an episode ends: “Why the problems you closed keep coming back”
Tomorrow morning, pick one action you closed last month, and go see if it held.
How an episode ends: “The warnings your plant is already giving you”
Tomorrow morning, ask your team one question. What warned you this week that nobody wrote down?

Topics

Nine topics

Every episode and its Shorts are filed under one of nine topics on YouTube. Each topic here has the free templates and tools that go with it.

Episodes

The latest episodes

Newest first. Under each one: who is in it, the one thing to do tomorrow, and the free downloads for its subject.

  1. · 3:52

    Line-Side Stock Limits: Why Extra Stock Hides Your Problems

    Extra stock at the line feels like safety. It is a problem in hiding. In this episode the near misses jump, the scorecard turns red, and the crew finds the cause sitting in the aisle: stock nobody ever put a limit on. In the WCM audit criteria I worked with, Logistics Score 3 sets line-side stock at two hours for bulky or expensive parts, two days for…

    • Gurpreet, CI lead
    • Diego, Safety (EHS)
    • Grace, Senior leadership
    • Dana, Maintenance
    • Priya, New hire
    • Marcus, Operator
    • Rosa, Supervisor

    Gurpreet, Diego, Grace, Dana, Priya, Marcus, Rosa

    Watch on YouTube
  2. · 4:29

    Audit Gap Analysis: Why Your Safety Score Is Probably Wrong

    Day 18 of 90. Gurpreet tells Grace safety is at Score three and done. It's sixty five percent, and nobody walked the criteria to find out. Priya asks the question that cracks it open. This is an audit gap analysis, the way a World Class Manufacturing plant ran it. Set the actual score and the target score for the pillar. Walk every criterion from Score 1…

    • Gurpreet, CI lead
    • Diego, Safety (EHS)
    • Kenji, People & HR
    • Grace, Senior leadership
    • Priya, New hire
    • Marcus, Operator
    • Rosa, Supervisor

    Gurpreet, Diego, Kenji, Grace, Priya, Marcus, Rosa

    Watch on YouTube
  3. · 5:27

    Kaizen Sketching: If You Can't Draw the Defect, You Can't Fix It

    One comment kept coming back in the WCM audit files I worked from: improve sketching. The plant didn't answer with a template. It built a sketching module, because a defect you can't draw is a defect you haven't understood yet. The method is the phenomenon sketch, the first move of a standard kaizen. One, hold the real part and rewrite the problem with…

    • Gurpreet, CI lead
    • Grace, Senior leadership
    • Priya, New hire
    • Marcus, Operator
    • Anam, Quality engineer
    • Rosa, Supervisor

    Gurpreet, Grace, Priya, Marcus, Anam, Rosa

    Watch on YouTube
  4. · 4:58

    LUTI Training: Everyone Passed, the Same Mistake Came Back

    Day 1 of a 90 day season. The plant is on a corporate watch list, and the first thing that goes wrong is forty end caps loaded backwards. The whole crew had taken the mistake proofing class. Everyone passed. Nothing on the floor changed. The method is LUTI from World Class Manufacturing: Learn, Use, Teach, Inspect. Learn one skill, short and hands on. Use…

    • Gurpreet, CI lead
    • Grace, Senior leadership
    • Priya, New hire
    • Marcus, Operator
    • Anam, Quality engineer
    • Rosa, Supervisor

    Gurpreet, Grace, Priya, Marcus, Anam, Rosa

    Watch on YouTube
  5. · 4:49

    Why Salaried Staff Skip Kaizens (And the Think Tank List Fix)

    Every salaried person takes part in kaizens. That was the rule in the Blue Room at a die-casting plant I worked with, and the file says it plainly: all white collars must participate. Anyone who doesn't goes on a Think Tank list, with the reason written beside the name. In this episode a CI lead is sure everyone is in. He hasn't counted. The steps, in plain…

    • Gurpreet, CI lead
    • Tom, Finance
    • Kenji, People & HR
    • Grace, Senior leadership
    • Marcus, Operator
    • Anam, Quality engineer
    • Rosa, Supervisor

    Gurpreet, Tom, Kenji, Grace, Marcus, Anam, Rosa

    Watch on YouTube
  6. · 4:55

    Stop Buying Advanced Tools Until You've Used 5G

    A machine stops every few minutes, and the fastest idea in the room is to buy a camera. This episode runs 5G on that station instead: go to the spot, look at the real part, count it, check it against theory, and check it against the standard. The camera stays on the list. The steps, in plain words. One: go to the spot and watch the machine run, then look at…

    • Gurpreet, CI lead
    • Grace, Senior leadership
    • Priya, New hire
    • Marcus, Operator
    • Anam, Quality engineer
    • Rosa, Supervisor

    Gurpreet, Grace, Priya, Marcus, Anam, Rosa

    Watch on YouTube
  7. · 5:11

    Leader Standard Work: Why Your Daily Reviews Drop Problems

    A calendar full of reviews is not a routine. Most pillar leads have the reviews. Few carry a problem from one review to the next. This story follows Rosa, newly named pillar lead, who plans to batch everything into one review on Friday at three, and a barcode reader that stops nine times in a single night. Leader standard work for a pillar lead, in plain…

    • Gurpreet, CI lead
    • Grace, Senior leadership
    • Dana, Maintenance
    • Priya, New hire
    • Marcus, Operator
    • Rosa, Supervisor

    Gurpreet, Grace, Dana, Priya, Marcus, Rosa

    Watch on YouTube
  8. · 5:17

    Your Suggestion Box Fails When Nobody Answers in 24 Hours

    Most suggestion programs don't fail because people have no ideas. They fail because leadership takes too long to answer, or never answers. And silence tells a floor exactly what its ideas are worth, even if no leader ever says it out loud. At an aluminum foundry where I worked, every idea went to the right manager, split by safety, cost, CI and maintenance…

    • Gurpreet, CI lead
    • Diego, Safety (EHS)
    • Tom, Finance
    • Grace, Senior leadership
    • Dana, Maintenance
    • Priya, New hire
    • Marcus, Operator

    Gurpreet, Diego, Tom, Grace, Dana, Priya, Marcus

    Free downloads for this episode

    Watch on YouTube
  9. · 5:17

    Your 5S Audit Passes Every Week and Fixes Nothing

    The 5S walk happens every Friday. The binder fills up. The same hose is still across the aisle three weeks later. In this episode the crew finds out why audits start strong and fade: a finding with no name on it is only a wish. They try something simple. Every finding gets one owner, one date and one place on the huddle board where everyone walks past. The…

    • Gurpreet, CI lead
    • Diego, Safety (EHS)
    • Tom, Finance
    • Kenji, People & HR
    • Grace, Senior leadership
    • Dana, Maintenance
    • Priya, New hire
    • Marcus, Operator
    • Rosa, Supervisor

    Gurpreet, Diego, Tom, Kenji, Grace, Dana, Priya, Marcus, Rosa

    Watch on YouTube
  10. · 5:13

    An SOP Nobody Owns Is Just a Suggestion

    Your SOP says one thing. Everyone does another. In this story a new hire follows the page at a fastening station, the housings leak, and she gets the blame. The page said bolts one to six. The crew had tightened them crisscross for two years. The page had no owner. No name, no review date, nobody to tell when the fixture changed. An SOP with no owner isn't…

    • Diego, Safety (EHS)
    • Tom, Finance
    • Grace, Senior leadership
    • Priya, New hire
    • Marcus, Operator
    • Anam, Quality engineer
    • Rosa, Supervisor

    Diego, Tom, Grace, Priya, Marcus, Anam, Rosa

    Watch on YouTube
  11. · 5:21

    The Longest Downtime Isn't the Costliest One

    Two stops. Ten minutes each. One cost a single packer some waiting. The other froze a whole warehouse. Most downtime logs only show the minutes, so the crew picks whichever stop is closest or loudest. This story follows Rosa, Marcus, Priya, Dana and Tom as they learn to count who's standing still before they choose what to fix. They also learn the…

    • Diego, Safety (EHS)
    • Tom, Finance
    • Kenji, People & HR
    • Grace, Senior leadership
    • Dana, Maintenance
    • Priya, New hire
    • Marcus, Operator
    • Rosa, Supervisor

    Diego, Tom, Kenji, Grace, Dana, Priya, Marcus, Rosa

    Watch on YouTube
  12. · 4:33

    Your Closed Maintenance Ticket Is Lying About Root Cause

    A press leaks. Maintenance fixes it. The ticket closes. The press leaks again. This happens three times before anyone asks why. In this episode the crew chases one hose leak until the root cause is dead. They find what was rubbing the hose, find the other presses with the same edge, and make sure both shifts hear about the fix. A problem is not solved when…

    • Diego, Safety (EHS)
    • Tom, Finance
    • Grace, Senior leadership
    • Dana, Maintenance
    • Priya, New hire
    • Marcus, Operator
    • Anam, Quality engineer
    • Rosa, Supervisor

    Diego, Tom, Grace, Dana, Priya, Marcus, Anam, Rosa

    Watch on YouTube
  13. · 4:41

    They Wanted a Three-Week Study. One Look Fixed It.

    A pallet of scratched brackets comes back from the customer. The CI lead is sure it's the steel and wants three weeks of testing. The truck leaves Thursday. The fix turned out to be a weld bump on a rail, and a new hire had heard it scrape for three weeks. That is the point of the episode: lean is common sense. If it were your own business, the first thing…

    • Gurpreet, CI lead
    • Tom, Finance
    • Grace, Senior leadership
    • Dana, Maintenance
    • Priya, New hire
    • Marcus, Operator
    • Anam, Quality engineer
    • Rosa, Supervisor

    Gurpreet, Tom, Grace, Dana, Priya, Marcus, Anam, Rosa

    Free downloads for this episode

    Watch on YouTube
  14. · 5:13

    The Check Sheet Said Fine. The Line Stopped Anyway.

    Four days. Every check signed. Then the line stopped for the third time in one week. This episode follows a crew chasing one question: who actually reads the operator check sheet? Autonomous maintenance doesn't fail because operators don't care. It fails when a check goes into a binder and nothing comes back. Marcus wrote down the whine two weeks before the…

    • Gurpreet, CI lead
    • Diego, Safety (EHS)
    • Tom, Finance
    • Grace, Senior leadership
    • Dana, Maintenance
    • Priya, New hire
    • Marcus, Operator
    • Rosa, Supervisor

    Gurpreet, Diego, Tom, Grace, Dana, Priya, Marcus, Rosa

    Watch on YouTube
  15. · 4:41

    Why Operators Stop Sharing Ideas (And How to Fix It)

    Your operators have ideas. They stopped telling you because nothing ever came back. A box on the wall, a slip of paper, no answer for months. Then leadership looks at the empty box and decides people have nothing to say. In this episode Grace finds a box nobody has opened since winter. Inside is a press guard that has been wobbling for eight months and a…

    • Gurpreet, CI lead
    • Diego, Safety (EHS)
    • Tom, Finance
    • Grace, Senior leadership
    • Dana, Maintenance
    • Priya, New hire
    • Marcus, Operator
    • Rosa, Supervisor

    Gurpreet, Diego, Tom, Grace, Dana, Priya, Marcus, Rosa

    Free downloads for this episode

    Watch on YouTube
  16. 4:48

    Your value stream map is a memory, not a measurement

    Watch on YouTube
  17. 4:29

    Why Big Rollouts Stall: Pick One Line First

    Watch on YouTube
  18. 4:52

    How plants really set and defend savings targets

    Watch on YouTube
  19. 6:06

    Lean Is Culture: Work With People, Not On Them

    Watch on YouTube
  20. 6:32

    Why Most Factories Are Still Behind on Digital (and When It Pays)

    Watch on YouTube
  21. 6:17

    Why Your Plant Is Still in the Stone Age (And When It's Fine)

    Watch on YouTube
  22. 6:27

    Where do savings targets come from, and which count?

    Watch on YouTube
  23. 5:42

    Savings Targets: How to Prove Real ROI in Your Plant

    Watch on YouTube
  24. 7:28

    Why is your plant still behind on improvement?

    Watch on YouTube
  25. 5:07

    Why Most Plants Are Still Years Behind on Digital

    Watch on YouTube
  26. 4:40

    Why a Label Problem Got a Four Month DMAIC Project

    Free downloads for this episode

    Watch on YouTube
  27. 4:00

    Your 98 Percent Yield Is Hiding a Second Factory

    Watch on YouTube
  28. 1:45

    The warnings your plant is already giving you

    Watch on YouTube
  29. 2:16

    Episode 1: Why the problems you closed keep coming back

    Watch on YouTube
The full playlist on YouTube

Free downloads

Download what the episodes point to

Every episode description leads with the free templates page and one guide that fits the story. Here is all of it in one place.

Seeing the same problems on your floor?

Bring the problem you are stuck on, and we will show you on a call how LeanSuite handles it.

Book a 45-minute demo

Pass it on

We want LeanSuite to be the best place on the internet for lean help. If this was useful, send it to someone on your team or in your network who needs it.