Quality manager: job description and interview questions
A quality manager makes sure what leaves the site meets the customer's requirements, and that the site learns from every defect. The role owns the quality management system, nonconformances and corrective actions, supplier quality and audits, and works with production to build quality into the process rather than inspect it in at the end.
- Also called
- Quality assurance manager, QA manager, Plant quality manager, Head of quality, Quality control manager
- Usually reports to
- Plant manager, with a dotted line to a corporate quality director
Roles and responsibilities
- Own the site quality management system and keep it certified and in use.
- Run nonconformance reporting: containment, disposition, root cause and corrective action.
- Manage customer complaints and returns, and lead the response to the customer.
- Manage supplier quality: approvals, scorecards, incoming inspection and supplier corrective actions.
- Plan and run internal audits and host customer and certification audits.
- Measure and report the cost of poor quality, and target the biggest costs with production.
- Make sure control plans, inspection and measurement systems are fit for purpose.
- Lead and develop the quality engineers, inspectors and technicians.
Skills
- Quality management systems such as ISO 9001 or a sector standard
- Root cause problem solving: 8D, 5 whys, fishbone
- Corrective and preventive action
- Statistical process control and process capability
- FMEA and control plans
- Supplier quality management
- Auditing
- Handling customers under pressure
KPIs the role usually owns
- Customer complaints and defective parts per million (Parts per million (PPM) in the glossary)
- Internal scrap and rework (Scrap rate in the glossary)
- First pass yield (First pass yield (FPY) in the glossary)
- Cost of poor quality (Cost of poor quality (COPQ) in the glossary)
- Corrective actions closed on time and effective (Corrective and preventive action (CAPA) in the glossary)
- Supplier quality scores (Supplier scorecard in the glossary)
Where the quality manager sits, and what the role answers for
- Reports to
Plant manager, with a dotted line to a corporate quality director
- The role
Quality manager
Protects the customer and cuts the cost of poor quality: the quality system, nonconformances, suppliers and audits. - Measured on
6 KPIs
Customer complaints and defective parts per million, Internal scrap and rework, First pass yield, Cost of poor quality, Corrective actions closed on time and effective, Supplier quality scores
Free to copy and edit
Quality manager job description
A starting point to edit for your site. Add the location, shift pattern, pay range and how to apply, and cut anything that does not fit the job you are hiring for. No sign-up needed.
Job title: Quality manager Reports to: Plant manager, with a dotted line to a corporate quality director About the role We are looking for a quality manager to lead quality at our site. You will own our quality management system, nonconformances and corrective actions, supplier quality and audits, and work with production to build quality into the process. What you will do - Own and maintain the site quality management system and its certification. - Run nonconformance reporting from containment through root cause to corrective action. - Manage customer complaints and returns and lead the response. - Manage supplier quality, including scorecards and supplier corrective actions. - Plan and run internal audits and host customer and certification audits. - Measure and report the cost of poor quality and lead the work to reduce it. - Lead and develop the quality team. What you will bring - Several years in quality roles in manufacturing, including leading a team. - Working knowledge of ISO 9001 or a sector quality standard. - Experience leading root cause analysis and corrective action, such as 8D. - Working knowledge of SPC, FMEA and control plans. - Experience dealing with customers and suppliers on quality issues. - Degree in engineering, science or a related field, or equivalent experience. Nice to have - Lead auditor training. - Six sigma green or black belt training. - Experience with a sector standard such as IATF 16949, AS9100 or ISO 13485. [Add: location, shift pattern, pay range, benefits and how to apply.]
12 quality manager interview questions
With what a good answer covers. Ask for a real example every time: the best candidates talk about what they did, with numbers, and are honest about what did not work.
- 1
How would you spend your first 90 days here?
A good answer: Learn the products and customers, walk the process, review complaints, scrap and open actions, check the quality system against what really happens on the floor, then agree the top few priorities with the plant manager.
- 2
A customer reports a defect. Walk me through what you do.
A good answer: Contain first at the site, in transit and at the customer, tell the customer what is being done, find the root cause and the escape point, correct both, and check the fix with data before closing.
- 3
How do you make sure a corrective action really worked?
A good answer: Define how effectiveness will be checked when the action is set, then check it with data after a set period, and reopen the action if the problem comes back.
- 4
How do you calculate and use the cost of poor quality?
A good answer: Count prevention, appraisal, internal failure and external failure costs with rules agreed with Finance, then use the biggest failure costs to choose where improvement effort goes.
- 5
Production wants to ship parts that are slightly out of specification. What do you do?
A good answer: Hold them, assess the risk with the facts, and ship only with an approved deviation from the customer if the requirement allows it; then fix why the parts were made out of specification.
- 6
How do you manage a supplier with poor quality?
A good answer: Share the data, raise a supplier corrective action, visit to see the process, agree a plan with dates, increase checks until it improves, and track them on a scorecard they can see.
- 7
What makes an internal audit useful?
A good answer: It checks what people really do against the standard, finds risks rather than paperwork errors, is done by trained auditors, and its findings get owners and are followed up.
- 8
How do you build quality into the process instead of inspecting it?
A good answer: Use FMEA to find risks, error-proof the critical steps, give operators clear standards and the authority to stop, and catch problems at the source rather than at final inspection.
- 9
Tell me about a quality problem you solved at the root.
A good answer: A specific defect with numbers, the method used, the real root cause found, what changed in the process or standard, and the data showing it stayed fixed.
- 10
How do you work with production without becoming the police?
A good answer: Be on the floor, share data openly, solve problems together, explain the customer's view, and make quality goals part of production's own targets.
- 11
How do you prepare for a certification audit?
A good answer: Keep the system live all year: internal audits on schedule, management reviews held, actions closed, records current, and people able to explain how the system works in their own words.
- 12
How do you know a measurement system can be trusted?
A good answer: Calibration on schedule, a gauge study or attribute agreement study on the critical measurements, and action when the measurement variation is too large compared with the tolerance.
Career path
Often comes from
- Quality engineer
- Supplier quality engineer
- Quality supervisor
- Process or manufacturing engineer
This role
Quality manager
Protects the customer and cuts the cost of poor quality: the quality system, nonconformances, suppliers and audits.
Often leads to
- Corporate or regional quality director
- Plant manager
- Operational excellence manager
Pay: BLS has no quality manager occupation of its own. Quality control systems managers are counted inside industrial production managers (SOC 11-3051), so that is the closest reference; the median covers production managers too. U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, industrial production managers (SOC 11-3051): median $126,060 a year, May 2025 national estimates (read 2026-10-03). Pay differs a lot by industry, site size and region.
LeanSuite for this role
Free templates for this role
Guides
Other manufacturing and CI roles
- Operational excellence managerRuns the improvement system for a site or a business: strategy deployment, the CI team, standards and the results they deliver.
- Kaizen facilitatorPlans and runs kaizen events, keeps teams to the method and makes sure the actions get finished after the event.
- Continuous improvement managerLeads the CI program at a site: the project pipeline, the CI team, training and the savings it reports.
- Production supervisor with CI dutiesRuns a shift or an area to plan, and leads the daily improvement there: huddles, problem solving and standard work.
- Continuous improvement engineerLeads improvement projects hands-on: analyses the process, finds the causes and puts in changes that cut waste and variation.
- Lean six sigma black beltLeads complex, data-heavy improvement projects with DMAIC and coaches green belts.
- Lean coordinatorKeeps the lean basics running day to day: 5S, visual management, audits, training and the idea program.
- Plant managerRuns the whole site: safety, quality, delivery, cost and people, and the management system that keeps them on target.
- Production managerRuns production across shifts and lines: the plan, the people, the losses and the daily meetings that keep output on target.
- EHS managerKeeps people safe and the site compliant: hazards, near misses, audits, incident investigations and safety culture.
- Maintenance managerKeeps equipment available and reliable: planned and autonomous maintenance, breakdowns, spares and the maintenance team.
Software for the quality manager's job
The LeanSuite modules built for this work, on one platform with your boards, actions and KPIs.
Book a demo
