Abnormality reporting, known as F-tagging, is the practice of attaching a visual tag to a machine the moment someone spots a deviation such as a leak, wear, corrosion or vibration. The F stands for fuguai, the Japanese word for abnormality, and there are three types of tag: red for maintenance, blue for operator and yellow for safety.
What is abnormality reporting (F-tags)?
Abnormality reporting is also known as F-tags. The F in F-tag stands for Fuguai, a Japanese word that translates to “deviation” or “abnormality” in English. So, an F-tag is a visual work order system where employees attach paper tags to machines and equipment when a process abnormality or irregularity has been identified. Essentially, F-tags are used to highlight deviations, faults, or abnormalities.
In short, manufacturing businesses utilize F-tags because it:
- Improves efficiency, safety, and OEE
- Increases employee engagement
- Helps foster a continuous improvement culture
- Is an important part of TPM and preventive maintenance programs
The Three Types of F-tags
There are three types of F-tags: maintenance, operator (non-maintenance), and safety.

1. Maintenance
Maintenance F-tags are red and requires specific personnel such as electricians, mechanics, and technicians to fix abnormalities.
2. Operator
Operator (non-maintenance) F-tags are blue and does not require any maintenance specific personnel to fix abnormalities. So, in other words, operators, supervisors, and cleaners can fix operator specific abnormalities. It is also important to note that examples of areas where operator F-tags should be attached to include:
- Wear
- Leakages
- Dust and dirt
- Corrosion
- Cracking, surface damage
- Overheating
- Vibration, noise
3. Safety
Safety F-tags are yellow and requires mechanics or operators to fix abnormalities. However, anyone can write and attach a safety F-tag.
- Tag colour
- Maintenance:Red
- Operator (non-maintenance):Blue
- Safety:Yellow
- Who fixes the abnormality
- Maintenance:Specific personnel: electricians, mechanics, technicians
- Operator (non-maintenance):No maintenance-specific personnel: operators, supervisors, cleaners
- Safety:Mechanics or operators
- Who can write and attach it
- Maintenance:Not stated in the post
- Operator (non-maintenance):Not stated in the post
- Safety:Anyone
- What it is used for
- Maintenance:Abnormalities that need maintenance skills
- Operator (non-maintenance):Wear, leakages, dust and dirt, corrosion, cracking, overheating, vibration, noise
- Safety:Not listed in the post
| Aspect | Maintenance | Operator (non-maintenance) | Safety |
|---|---|---|---|
| Tag colour | Red | Blue | Yellow |
| Who fixes the abnormality | Specific personnel: electricians, mechanics, technicians | No maintenance-specific personnel: operators, supervisors, cleaners | Mechanics or operators |
| Who can write and attach it | Not stated in the post | Not stated in the post | Anyone |
| What it is used for | Abnormalities that need maintenance skills | Wear, leakages, dust and dirt, corrosion, cracking, overheating, vibration, noise | Not listed in the post |
The post's own image caption describes the maintenance tag as pink; the text says red, which is used here.
3 reasons why you should digitize abnormality reporting
(F-tags)
Traditionally, F-tags are done manually by hand — an individual attaches the relevant F-tag paper to the faulty machine or equipment, then the right personnel fixes it. But, this process is inefficient as:
- You waste a lot of time and money putting in a lot of administrateive work to manually manage your tagging process
- It takes a long time to close critical problems, increasing your machine and equipment downtime, costing you more money
- You’re unable to gain in-depth insight on your tagged issues so that you can improve your operational processes
Therefore, you should digitize abnormality reporting (F-tags) in order to make your tagging process easier to manage and control. Ultimately, there are three reasons why you should digitize abnormality reporting:

1. Automatically capture data in real-time
The first reason why you should digitize abnormality reporting is because it allows you to automatically capture data and analyze reports in real-time. Some problems need to be fixed right away, while others are lower priority. Digitizing abnormality reporting allows you to prioritize problems that may be causing you the most losses. In essence, it enables you to identify and resolve high priority problems quicker.
2. Save time and money
The second reason why you should digitize abnormality reporting is because it saves you and time money. Digitizing abnormality reporting significantly reduces the administrative effort that was traditionally expected. As a result, your employees can focus on resolving problems, instead of data management. Moreover, since your employees are able to focus more on resolving problems, they’ll resolve problems faster, resulting in reduced machine or equipment downtime. Therefore, saving you money.
3. Increase employee engagement
The third and final reason why you should digitize abnormality reporting is because it increases employee engagement. Digitizing abnormality reporting increases efficiency and productivity on your shop-floor and your employees will clearly see these changes from their reporting. This will motivate them to continue working harder to make positive changes to your operational processes. Thus, engaging them.
Frequently Asked Questions
What is an F-tag in manufacturing?
An F-tag is a visual work order. When an employee spots a deviation, fault or abnormality on a machine, they attach a tag to it so the right person can see it and fix it. The F stands for fuguai, Japanese for abnormality. F-tagging is part of TPM and preventive maintenance programs and supports efficiency, safety, OEE and employee engagement.
What are the three types of F-tags?
Maintenance, operator and safety. Maintenance tags are red and need specific personnel such as electricians, mechanics or technicians. Operator tags are blue and cover abnormalities that operators, supervisors or cleaners can fix themselves. Safety tags are yellow; anyone can write and attach one, and mechanics or operators fix the problem it points to.
What abnormalities should get an operator F-tag?
Operator tags go on the small, visible problems that do not need a maintenance specialist: wear, leaks, dust and dirt, corrosion, cracking or surface damage, overheating, and unusual vibration or noise. Catching these early is the point. Left alone, each one is the start of a breakdown, a quality problem or a safety incident.
What is wrong with paper F-tags?
Paper tags work, but managing them by hand is slow and expensive. Someone has to collect, record and chase every tag, so administrative work piles up. Critical problems take longer to close, which keeps machines down longer. And because the information sits on bits of card, nobody can analyze the tagged issues to see patterns and improve the process.
Why should you digitize abnormality reporting?
Three reasons. Data is captured and analyzed in real time, so the problems causing the biggest losses can be prioritized and fixed first. Administrative effort drops, which frees people to resolve problems and cuts downtime, saving money. And employees see the results of their own reports, which keeps them engaged and motivated to keep improving the process.
Who is allowed to write a safety F-tag?
Anyone. Safety tags are the one type that any employee can write and attach, because a hazard should never wait for the right job title to notice it. Fixing the problem is then down to a mechanic or an operator, depending on what it is. Yellow makes the tag easy to spot on the floor.
Digitize abnormality reporting (F-tags) with LeanSuite
LeanSuite is a lean manufacturing software that offers various built-in apps designed to accelerate your continuous improvement program. One of them being the Daily Issue Management System, a maintenance tagging system that digitizes abnormality reporting (F-tags). That is to say, it digitizes identifying abnormalities, attaching relevant pictures and documents, assigning abnormalities to the correct personnel, and much more.
Free for this topic: 5W1H template, 5 Whys template, Lean method navigator
Want our lean manufacturing guides first in Google? Add us as a preferred source.
Add LeanSuite as a preferred source on Google (opens in a new tab)







