Skip to content
LeanSuite

Free training resource

Lean games: four simulations to run with your team

Four classic lean manufacturing games for a training room or a shift meeting: paper airplanes for flow, dice for variation and bottlenecks, the 5S numbers game, and a kanban card game for pull. Each one has the rounds, the materials, a blank table to score each round, debrief questions, and a way to turn what the team saw into a real kaizen. The 5S numbers game also runs right here in your browser.

Play the 5S numbers game now

Pick a game

Every game follows the same shape: play a round, change one rule, play again, and compare. Keep the rules the same between rounds except for the one you mean to change, and leave at least a third of the time for the debrief. Scores vary from group to group, so treat them as something to talk about, not a target.

Game 1 · Flow, WIP and lead time

The paper airplane game: push versus pull

Learning goal: See what a pile of work in progress does to lead time and quality, and feel the difference between pushing work to the next person and letting them pull it when they are ready.

Players
5 to 7 per line: 4 or 5 builders, 1 inspector or customer, 1 timekeeper. Run several lines side by side for a big group.
Time
45 to 60 minutes for three rounds and a debrief

Materials

  • A ream of A4 or letter paper (about 100 sheets per line)
  • One finished sample plane per line, so everyone builds the same design
  • A stopwatch or phone timer per line
  • Coloured marker or sticky dots to mark one tracer sheet each round
  • Masking tape to mark a square on the table between each pair of builders
  • Printed scoring table (below), one per line

Set up

  1. Split one simple plane design into four or five fold steps, one step per builder, and show each builder only their own step.
  2. Sit the builders in a row. The first one takes flat sheets from a stack; the last one hands planes to the inspector.
  3. The inspector checks each plane against the sample and keeps good ones and rejects in two piles.
  4. Agree the length of a round, usually 5 minutes, and what counts as a good plane.

Rounds, step by step

  1. Round 1: push in batches

    1. Each builder works in batches of five: fold five sheets, then pass all five on together.
    2. Builders work as fast as they can and never wait to be asked.
    3. Halfway through, the timekeeper marks the top flat sheet with a dot and notes the time. Note when that plane reaches the inspector.
    4. At the end of the round, stop. Count good planes, rejects and every sheet still on the table between stations.
  2. Round 2: one piece at a time

    1. Same people, same steps. Now each builder folds one sheet and passes it on straight away.
    2. Builders still work at their own pace, so piles can still form in front of a slow step.
    3. Mark a tracer sheet at the same moment as in round 1 and time it again.
    4. Count and record the same things.
  3. Round 3: pull with a WIP limit of one

    1. Tape a square between each pair of builders. It may hold one plane at most.
    2. A builder may only fold when the square after them is empty. If it is full, they wait.
    3. The inspector pulls from the last square when ready, which is what lets the line move.
    4. Time the tracer, count and record. If there is time, let the team rebalance the steps before a fourth round.

What to measure each round

Print this table and fill it in as you play. Write the numbers where the whole group can see them.

  • Good planes: planes the inspector accepted in the round.
  • Rejects: planes that failed the check, and how far down the line each fault was found.
  • WIP left on table: every sheet or part-built plane between the first builder and the inspector when time is called.
  • Tracer lead time: seconds from the marked sheet leaving the stack to reaching the inspector.

Debrief questions

  • Where did piles build up in round 1, and who was waiting while others were busy?
  • How did the tracer lead time compare across the rounds, and what did the pile in front of each station have to do with it?
  • When a fold was wrong, how many planes had already been made the same wrong way before anyone noticed?
  • In round 3, how did it feel to wait for an empty square? What did the waiting tell you about the line?
  • Which step is the slowest, and what would you change about it first?
  • Where on our own floor do we push work to the next step in batches?

Tips for the facilitator

  • Keep the plane design simple. The lesson is the flow, not the folding.
  • Do not tell the team what round 3 will show. Let the numbers speak.
  • If one line is much faster, swap one builder between lines and play again.

Turn the lesson into a kaizen in LeanSuite

  1. Pick the real line or office process the team named in the last debrief question.
  2. Open a kaizen in Kaizen & Projects with the problem in one line, today's WIP count and lead time as the baseline, and the team who will walk it.
  3. Log every smaller idea from the debrief in Idea Management so each has an owner and a status, even the ones that are not ready yet.
  4. Walk the process, count the piles, try a WIP limit on one handoff, and record the before and after numbers in the kaizen.

Game 2 · Variation, dependent steps and the bottleneck

The dice game: variation and bottlenecks

Learning goal: Show how ordinary ups and downs at each step, added up along a line of dependent steps, leave the line making less than any one step could, and why the slowest step sets the pace.

Players
5 or 6 per line, each playing one workstation, plus one scorekeeper
Time
30 to 45 minutes

Materials

  • One six-sided die per player
  • About 100 tokens per line: beans, coins, paper clips or matchsticks
  • A cup or a marked spot on the table in front of each player, for incoming work
  • Printed scoring table (below)

Set up

  1. Sit the players in a line. Player 1 has an unlimited supply of tokens; each later player starts with an empty spot in front of them.
  2. Agree the rule: on your turn, roll the die. You may move that many tokens from your own spot to the next player's spot, but only as many as you actually have.
  3. Player 1 always has enough. The last player moves tokens off the table as finished goods.
  4. Before round 1, ask the group to guess how many tokens the line will finish in 20 turns. A die averages 3.5, so many people guess 70.

Rounds, step by step

  1. Round 1: every station rolls a normal die

    1. Play 20 turns. In each turn, players roll and move in order, starting with player 1.
    2. The scorekeeper writes down how many tokens leave the line each turn.
    3. At the end, count finished tokens and the tokens sitting in front of each player.
  2. Round 2: one slow station

    1. Clear the table. Give player 3 a slower rule: they move half their roll, rounded up (1 or 2 moves 1, 3 or 4 moves 2, 5 or 6 moves 3).
    2. Play 20 turns again and record the same numbers.
    3. Note where tokens pile up and which players sit with nothing to move.
  3. Round 3: steady the work

    1. Clear the table. Keep player 3 slow, but let everyone else move a steady 4 every turn (or their roll, if the group prefers to keep some variation and add a buffer instead).
    2. Optional: start player 3 with a buffer of 6 tokens so the slow station never runs dry.
    3. Play 20 turns and record. Compare the three rounds.

What to measure each round

Print this table and fill it in as you play. Write the numbers where the whole group can see them.

  • Tokens finished: tokens moved off the table by the last player in 20 turns.
  • WIP on table at end: every token sitting between player 1 and the end.
  • Biggest pile: the largest stack at the end and whose spot it is in front of.
  • Turns the last station had nothing: how often the end of the line rolled but had no token to move.

Debrief questions

  • How did the finished count compare with the guess before round 1? Why might a line of average-3.5 steps not finish 70?
  • Where did tokens pile up in round 2, and what happened to everyone after the slow station?
  • If you could speed up one station, which one would raise output, and which would only make a bigger pile?
  • What did steadying the other stations, or a buffer in front of the slow one, change?
  • Which step on our own line behaves like player 3? How do we know?
  • Where does variation come from on our floor: changeovers, missing parts, absences, rework?

Tips for the facilitator

  • Write each turn's numbers on a flip chart so the whole room sees the piles grow.
  • Twenty turns is enough. More turns make the same point with more tokens.
  • Results swing from game to game. That swing is part of the lesson, so run it twice if time allows.

Turn the lesson into a kaizen in LeanSuite

  1. Name the step on your own line that the team thinks is the bottleneck, and the evidence for it.
  2. Open a kaizen in Kaizen & Projects aimed at that one step: baseline output per shift, the losses you see there, and a target the team agrees.
  3. Send the causes of variation the team listed (late material, long changeovers, unplanned stops) into Idea Management so each gets an owner.
  4. Check the result at the bottleneck, not across the whole line, and record it in the kaizen before closing it.

Game 3 · Sort, set in order, shine, standardize and sustain

The 5S numbers game

Learning goal: Feel how much time goes into searching when things have no set place, and see what each of the 5S steps does to that time, one step per round.

Players
Any number, playing alone or in pairs, with one facilitator keeping time
Time
20 to 30 minutes

Materials

  • Four printed sheets per player, one per round (see the round notes for what each sheet holds)
  • A pen per player
  • A stopwatch, or the online version of the game below
  • Printed scoring table (below)

Set up

  1. Make four sheets. Sheet 1: the numbers 1 to 49 scattered across the page in mixed sizes and angles, with extra numbers from 50 to 90 mixed in.
  2. Sheet 2: only 1 to 49, still scattered. Sheet 3: 1 to 49 in a neat grid, all the same size and upright, but in a mixed order. Sheet 4: the same grid with every number in its set place, in order, row by row.
  3. Hand out sheets face down. Each round, players strike through 1, 2, 3 and so on in order, as far as they can.
  4. Pick one rule and keep it: either a fixed time (30 seconds is common) and count how far people got, or time how long it takes to reach 49.

Rounds, step by step

  1. Round 1: as it is today

    1. Turn over sheet 1 and start the clock. Strike numbers in order.
    2. Stop at the time limit, or when the player reaches 49. Record the result.
  2. Round 2: sort

    1. Explain sort: remove what is not needed for the job. Here, the numbers above 49 are gone.
    2. Play sheet 2 and record.
  3. Round 3: set in order (and shine)

    1. Explain set in order: a fixed, easy-to-see place for each thing. The grid lines everything up and every number is the same size and the right way up, which is the shine: nothing smudged or hard to read.
    2. Play sheet 3 and record.
  4. Round 4: standardize

    1. Explain standardize: everyone uses the same agreed layout, so anyone can find anything without being told.
    2. Play sheet 4, record, and then talk about sustain: what would make this layout survive the next month on a real bench.

What to measure each round

Print this table and fill it in as you play. Write the numbers where the whole group can see them.

  • Highest number reached: with a fixed time, the last number struck. With a race to 49, the time in seconds.
  • Numbers missed or out of order: any slip, which shows how clutter causes errors as well as delay.
  • What changed: one line from the player on what made the round easier or harder.

Play it here

The 5S numbers game, online

Click or tap the numbers 1 to 49 in order, as fast as you can. Each round applies one more 5S step to the board. Keyboard: Tab moves between numbers, Enter or Space picks one.

  1. Round 1As it is
  2. Round 2Sort
  3. Round 3Set in order
  4. Round 4Standardize

Round 1: As it is. 1 to 49 scattered in mixed sizes and angles, with extra numbers from 50 to 90 mixed in.

Find: –

Time: 0.0 s

The clock starts when you press Start. Find 1, then 2, then 3, all the way to 49.

Your round times
Round5S stepTimeWrong clicks
Round 1As it is––
Round 2Sort––
Round 3Set in order––
Round 4Standardize––

Debrief questions

  • What did each round remove from the search: the extra numbers, the mess, or the guessing?
  • Which round changed your result the most? Why that one?
  • Round 4 needs everyone to agree the layout. What happens at work when one shift sets things out differently?
  • What on our floor is like sheet 1? Name a cabinet, a shadow board, a shared drive folder or a cart.
  • What would stop the area slipping back to sheet 1 in a month?

Tips for the facilitator

  • Print sheet 1 with real clutter: mixed fonts, sizes and angles. The online version below does this for you.
  • Keep the rule the same every round, either fixed time or race to 49, or the numbers cannot be compared.
  • Players get faster from practice alone. Point that out, and ask how much of each change came from 5S and how much from learning the game.

Turn the lesson into a kaizen in LeanSuite

  1. Pick one real area the team named, take a photo of it today, and time one common search (a tool, a gauge, a form).
  2. Open a 5S kaizen in Kaizen & Projects with that photo and time as the baseline, and plan sort, set in order and shine as tasks with owners and dates.
  3. Capture every smaller fix from the walk (a missing label, a broken shadow board, a cart with no home) in Idea Management.
  4. Run a short 5S audit on the area after a few weeks to check it held, and attach the after photo and time to the kaizen.

Game 4 · Pull, kanban signals and stock levels

The kanban card game: pull with cards

Learning goal: Show how a small, fixed number of cards can tell a supplier exactly what to make and when, and how that keeps stock low while the customer still gets what they ask for.

Players
4 to 6: one customer, two or three production steps, one supplier or store, one scorekeeper
Time
45 to 60 minutes

Materials

  • Three kinds of simple product the team can make quickly, such as LEGO or paper shapes in three colours (red, blue, green)
  • A customer order deck: about 30 index cards, each showing one colour, shuffled
  • Kanban cards: 2 or 3 per colour, per stage, written by hand
  • Small trays or marked squares for each stage's outgoing store
  • Printed scoring table (below)

Set up

  1. Lay out the line: supplier, step 1, step 2, finished goods store, customer.
  2. Agree what each step does to the product, keeping it to a few seconds of work.
  3. The customer turns over one order card every 10 seconds and expects that colour from finished goods straight away.
  4. Agree what counts as a missed order: no matching product in finished goods when the card is turned.

Rounds, step by step

  1. Round 1: push to a forecast

    1. Tell each step to make a forecast mix: say 5 of each colour, as fast as they can, and send it on.
    2. The customer turns order cards for 5 minutes.
    3. At the end, count missed orders and every product sitting anywhere in the line.
  2. Round 2: kanban pull

    1. Clear the line. Put 2 finished products of each colour in the store, each with a kanban card attached.
    2. When the customer takes a product, its card goes back to the step before. That card is the only permission to make one more of that colour.
    3. Each step works the same way with its own supplier: no card, no making.
    4. Run 5 minutes and record the same numbers.
  3. Round 3: tune the card count

    1. Ask the team to change the number of cards per colour, one up or one down, based on what they saw.
    2. Optional: change the order deck mix partway, for example more red, and watch how the cards respond.
    3. Run 5 minutes, record, and compare.

What to measure each round

Print this table and fill it in as you play. Write the numbers where the whole group can see them.

  • Orders filled: order cards met straight from finished goods.
  • Orders missed: order cards with no matching product waiting.
  • Stock in line at end: every product or part, at every stage, when time is called.
  • Kanban cards per colour: the number in play in that round (none in round 1).

Debrief questions

  • In round 1, what did the line make that nobody ordered, and what did the customer ask for that was not there?
  • In round 2, how did each step know what to make next without anyone telling them?
  • What happened when you removed a card? When you added one?
  • What would a kanban card stand for on our floor: a bin, a cart, a slot on a board?
  • Which part or material do we run out of, or hold too much of, today?

Tips for the facilitator

  • Write the kanban cards by hand on the day. It makes the point that a card is just a signal.
  • Keep the work at each step short so the round is about the signal, not the building.
  • Let the team set the card count in round 3. Their reasons are the best part of the debrief.

Turn the lesson into a kaizen in LeanSuite

  1. Choose one part or material the team named, and count how much of it sits in the area today.
  2. Open a kaizen in Kaizen & Projects to set up a simple card or two-bin loop for that one part: baseline stock, shortages in the last month, and the loop size you will try.
  3. Put the ideas that came out of the game, like a bin label or a supermarket spot, in Idea Management for the area team to pick up.
  4. Review stock and shortages for that part after the loop has run a few weeks and record both in the kaizen.

From the training room to the floor

A game gives the team a shared picture. LeanSuite keeps what comes next in one place: the kaizen with its baseline and owner, the ideas from the debrief, and the before and after numbers. Bring a process your team named in a game to a 45-minute demo and we will set it up with you.

FAQ

About lean games

  1. A lean game is a short hands-on simulation that lets a team feel a lean idea, such as flow, pull or 5S, before they try it on the real floor. Teams play a few rounds, change one rule each time, measure what happens and talk about it. The talk at the end matters more than the score.

  2. For a brand new group, the 5S numbers game is the quickest to set up and needs only paper and pens. The paper airplane game is the usual first choice for flow and WIP. Run the dice game when a team argues about which step to speed up, and the kanban card game before you set up a real kanban loop.

  3. Yes. This page has a free in-browser version with four rounds: as it is, sort, set in order and standardize. It times each round and shows your times in a table. It works with a mouse, touch or keyboard.

  4. No. They are teaching tools, and results change with the group, the facilitator and practice from one round to the next. What a game does well is give a team a shared picture and shared words. The proof comes from the kaizen you run afterwards on a real process, with real before and after numbers.

  5. Use your browser's print command on this page. The print layout drops the site menus and the online game and keeps the rounds, materials, blank scoring tables and debrief questions for each game.

  6. End every game by naming one real process that behaves like the game. Open a kaizen for it in LeanSuite's Kaizen & Projects with a baseline, a team and a date, and log the smaller ideas from the debrief in Idea Management so none of them are lost.